The bonnet protector you need depends on your Ranger's generation, so start there. Ford Ranger bonnet protectors are precision-fit to each body shape, and a PX1 guard will not sit right on a Next Gen. Match yours to the year: PX1 (2012 to 2015), PX2 (2016 to 2018), PX3 (2019 to 2021), or Next Gen / PX4 (2022 to 2026). Get the generation right and it is a no-drill, clip-on fit from there.
Below is the quick way to identify your Ranger, a fitment table with the exact product for each generation, and the difference between our standard and THICK guards, so you order the right one the first time.
Which bonnet protector fits my Ford Ranger?
Ford has run four Ranger generations in NZ over the past decade. Here is how to tell them apart:
- PX1 (2012 to 2015) — the first of the modern Rangers, rounder headlights.
- PX2 (2016 to 2018) — facelift with the bolder grille and new headlight shape.
- PX3 (2019 to 2021) — the sharper front end before the model change.
- Next Gen / PX4 (2022 to 2026) — the all-new, wider body with the C-clamp headlights.
Not sure? Check the build year on the door-jamb plate, or send us your rego and we will confirm before you order.
| Your Ranger | Years | The protector to buy | From |
|---|---|---|---|
| PX1 | 2012-2015 | Ranger PX1 Bonnet Protector | $59 |
| PX2 & PX3 | 2016-2021 | Ranger PX2/PX3 Bonnet Protector | $59 |
| Next Gen / PX4 | 2022-2026 | Ranger Next Gen Bonnet Protector | $59 |
What does a bonnet protector actually do?
A bonnet protector (also called a bonnet guard or stone guard) is a clear or tinted shield that clips to the front edge of your bonnet. On NZ's gravel roads and open highways it does one job very well: it takes the hits your paint would otherwise take.
- Stops stone chips from trucks, gravel and loose metal roads before they mark your paint.
- Deflects bugs and debris up and over the windscreen at highway speed.
- Protects resale value by keeping the leading edge of the bonnet chip-free.
For the price of a tank or two of diesel, it is the cheapest paint insurance you can buy for a ute that actually gets driven.
UV-stable, no-drill clip-on fit. Stops stone chips before they land. NZ stock, ships daily.
Standard vs THICK: which should I choose?
We offer some Ranger guards in a standard acrylic and a THICK version. Both clip on the same way and protect the same area. The difference is the material:
- Standard ($59) — the everyday guard. Ideal for sealed roads, commuting and the occasional gravel run.
- THICK ($69 to $99) — a heavier-gauge acrylic built for people who spend real time on NZ gravel roads and rural highways, where stones are bigger and more frequent.
If most of your driving is town and highway, standard is plenty. If you live rurally or tow on metal roads every week, the THICK guard is worth the extra.
Precision-fit for the Next Gen body. Clip-on, no drilling, ships from Auckland. THICK option available.
How do you fit a Ford Ranger bonnet protector?
Fitting is a no-drill, DIY job that takes about 15 minutes. In short: clean the front edge of the bonnet, position the guard using the pre-fitted clips and brackets, and secure it. No cutting, no holes, no workshop needed. Each guard comes with fitting instructions, and you can remove it later without leaving marks.
How much is a Ranger bonnet protector in NZ?
A Tough Trucks Ranger bonnet protector is $59 for the standard guard, and $69 to $99 for the heavier THICK version, depending on the generation. All ship from our Auckland warehouse with fast NZ delivery, and every product is backed by our quality guarantee and 30-day returns.
Frequently asked questions
Will a PX2 bonnet protector fit a Next Gen Ranger?
No. Each guard is precision-fit to its generation. A PX2/PX3 guard will not sit correctly on the Next Gen (PX4) body. Always match the protector to your Ranger's year.
Does a bonnet protector damage my paint?
No. Our guards clip on with no drilling and are designed to be removed cleanly. Keeping the guard and the bonnet edge free of grit is all the care they need.
Standard or THICK for gravel roads?
For regular gravel and rural driving, choose the THICK guard. Its heavier-gauge acrylic is built for bigger, more frequent stone strikes. Standard is fine for mostly sealed-road use.
Can I fit it myself?
Yes. It is a no-drill, clip-on install that takes around 15 minutes with the included instructions. No tools or workshop required.
Do you deliver across New Zealand?
Yes. All bonnet protectors ship from our Auckland warehouse with fast NZ-wide delivery and 30-day returns.
Protect your Ranger's paint from the first chip
No-drill clip-on fit, NZ stock, ships daily. Match your generation and go.
NZ stock · Ships daily from Auckland · 30-day returns
0 comments