Mazda BT-50 bonnet guard

Mazda BT-50 Bonnet Protector

BT-50 2012-2020
$69.00
Skip to product information
Mazda BT-50 bonnet guard
1/5

Mazda BT-50 Bonnet Protector

300+ verified reviews from NZ 4x4 owners Read themRated 4.95 out of 5 across 334 reviews.
$69.00
$69.00

Stops the stone chips, bug strikes and UV that wreck the front of a Mazda BT-50 bonnet, and clips on in about fifteen minutes without a hole drilled.

MAZDA BT-50 FIT
✓
DEFLECTS STONE CHIPSProtects the bonnet before they reach the paint
✓
PRECISION-MOULDED FITNo gaps, no rattle at speed
✓
NO DRILLINGClips onto factory mounting points
Year/ModelBT-50 2012-2020
  • 30-day returns
  • Warranty against defects
  • Ships from our Auckland warehouse
Read the full returns policy
FITMENT
BT-50 2012–2020Moulded off the actual BT-50 panel. A Ranger guard won't fit.
INSTALLATION
NO DRILLINGClips onto the factory mounting points, no drilling, about 10 minutes.
MATERIAL
TINTED ACRYLICUV-stable, won't yellow or go brittle over time.
RETURNS
30 DAYS, NO RESTOCKING FEEUnused and uninstalled, in original packaging.
MAZDA BT-50 BONNET PROTECTOR

NOT A RE-BADGED RANGER PART.

The BT-50 shares its bones with the Ford Ranger of the same generation, but bonnet guards aren't interchangeable .

01

DEFLECTS STONE CHIPS

Stops stones, bugs and road debris before they reach the paint.

02

PRECISION-MOULDED FIT

Flush to the bonnet line, no gaps, no rattle at speed.

03

UV-STABLE ACRYLIC

Tinted acrylic shell that won't yellow or go brittle over time.

04

NO DRILLING

Clips onto the factory mounting points.

NOT A RE-BADGED RANGER PART.
INSTALLATION

FITTING IS STRAIGHTFORWARD.

Clips onto the factory mounting points, no drilling, about 10 minutes.

01

NO DRILLING

Clips onto the factory mounting points under the bonnet edge.

02

ABOUT 10 MINUTES

A straightforward single-person job for most vehicles.

03

PRECISION-MOULDED

Sits flush against the bonnet line, no gaps, no rattle.

04

CLEAN THE EDGE FIRST

Wipe down the bonnet edge before fitting for the best hold.

FITTING IS STRAIGHTFORWARD.
  • 5 stars: 4 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
M
M J Nottle
Easy to fit great quality

Easy to fit great quality, best service

R
Rayden Rongo
Bt50 bonnet protection!

The bonnet protector was real simple to install and looks good on my ute!

S
Sheena Mudaliar
Excellent product and service

Very happy with the whole process! The weather shields and bonnet protector was excellent quality, added to that it was very nicely packaged and delivery was quite fast. Love their service!

S
South Auckland Motors C/O Paneltech LTD Limited
THANKS for the great service now i know what

THANKS for the great service now i know what you have may look at other items

AUCKLAND BASED Our own warehouse, real stock on the shelf
SHIPPED NZ-WIDE Overnight most NI urban, 2 to 3 days SI, rural longer
300+ 5-STAR REVIEWS Verified reviews from Kiwi 4x4 owners
IN-HOUSE INSTALLATION Our own team can fit it for you
BEFORE YOU BUY

COMMON QUESTIONS

Will this fit my Mazda BT-50?

This is made for the Mazda BT-50 specifically, not a universal part trimmed to suit. It is listed to fit BT-50 2012–2020.

Model runs change part way through a year, so if your vehicle sits near the edge of that range, send us your rego or VIN and we will confirm the fitment before you order rather than after.

Does fitting it mean drilling my bonnet?

No. It clips onto the factory bonnet edge using the existing mounting points, so there is no drilling and no modification to your paint. Most people have it on in 15 to 20 minutes with basic hand tools.

If you would rather not do it yourself, our own team fits these in-house at our Avondale workshop. Call 021 541 306 to book a time.

Will it mark my paint or trap water underneath?

It mounts on the bonnet edge with the supplied rubber-backed hardware, which holds it off the paint rather than against it. The gap it leaves is what lets air and water pass through instead of sitting there.

Give underneath a rinse when you wash the vehicle, the same as you would a set of mud flaps, and it will not cause you grief.

How fast will it get to me?

Orders placed on a business day are usually picked and dispatched the same or the next business day from our own Auckland warehouse, and you get tracking by email as soon as it leaves us.

From the day it ships, North Island urban addresses are generally overnight and South Island urban is 2 to 3 business days. Rural addresses take a little longer. You can also choose pickup at checkout and collect from our Avondale store once we email to say it is ready.

What happens if it does not fit, or I change my mind?

You can return any unused, uninstalled item in its original packaging within 30 days of delivery for a refund or an exchange, and there is no restocking fee. Ordering the wrong part, or finding it does not suit your vehicle, is covered.

Email info@toughtrucks.nz or call 021 541 306 before you send anything back so we can confirm the return and give you the correct address. Once it is back with us and checked, refunds go through within 5 business days.

Still not sure it is the right part? Call 021 541 306 or email info@toughtrucks.nz with your rego and we will confirm fitment before you order.

READY TO PROTECT YOUR BONNET?

STOP THE CHIP BEFORE IT STARTS.

Precision-moulded fitment, UV-stable construction and a no-drill install.

FITMENT BT-50 2012–2020
MATERIAL TINTED ACRYLIC
INSTALLATION NO DRILLING
MAZDA BT-50 BONNET PROTECTOR
$69.00
✓ Precision-moulded fitment✓ No-drill clip-on install