Ford Ranger Roll Bar Sports Bar Extended Arms 2012-2026 — Tough Trucks NZ

Ford Ranger Roll Bar/Sports Bar (extended arms) 2012-2026

PX1 2012-2015
$799.00
Skip to product information
Ford Ranger Roll Bar Sports Bar Extended Arms 2012-2026 — Tough Trucks NZ
1/16

Ford Ranger Roll Bar/Sports Bar (extended arms) 2012-2026

300+ verified reviews from NZ 4x4 owners Read themRated 4.95 out of 5 across 334 reviews.
$799.00
$799.00

Stops the load shifting around the Ford Ranger tray and gives the back of the ute the stance it was missing, with mounting points already built in.

FORD RANGER FIT
✓
WIDER MOUNTING SPANExtended arms space your mounting points further apart for bigger accessories.
✓
SAME LOAD PROTECTIONStops a shifting tray load hitting the rear window, same as the standard bar.
✓
BOLT-ON, NO DRILLINGBolts to factory tray mounting points.
Year/Model
  • 30-day returns
  • Warranty against defects
  • Ships from our Auckland warehouse
Read the full returns policy
FITMENT
PX1 2012–15 · PX2 2016–18 · PX3 2019–21 · PX4 2022–26One listing covers all four PX generations. Select your generation when you add to cart.
INSTALLATION
BOLT-ON, NO DRILLINGBolts to factory tray mounting points, no drilling into the tub.
MATERIAL
HEAVY-GAUGE STEELRated to genuinely stop a shifting load, not just look the part.
RETURNS
30 DAYS, NO RESTOCKING FEEUnused and uninstalled, in original packaging.
FORD RANGER FIT

WIDER SPAN FOR BIGGER GEAR.

The extended-arm version exists for one reason: a wider light bar or a roof-mounted tent annexe needs a wider mounting span than the standard roll bar gives you.

01

WIDER MOUNTING SPAN

Extended arms space your mounting points further apart for bigger accessories.

02

SAME LOAD PROTECTION

Stops a shifting tray load hitting the rear window, same as the standard bar.

03

BOLT-ON, NO DRILLING

Bolts to factory tray mounting points.

WIDER SPAN FOR BIGGER GEAR.
STANDARD OR EXTENDED ARMS?

CHOOSE THE SPAN THAT SUITS YOUR SETUP.

Both do the same load-protection job. The difference is mounting width for bigger accessories.

EXTENDED ARMS

FORD RANGER ROLL BAR (EXTENDED ARMS)

Wider mounting span for a bigger light bar or a roof-tent annexe.

Extended mounting arms
Same load protection
Wider accessory span
Bolt-on, no drilling
YOU'RE VIEWING THIS MODEL
STANDARD

FORD RANGER ROLL BAR

Standard mounting span for a UHF aerial, worklights or a flag pole.

Heavy-gauge steel
Stops a shifting load
Pre-drilled mount points
Bolt-on, no drilling
INSTALLATION

FITTING IS STRAIGHTFORWARD.

Bolts to factory tray mounting points, no drilling into the tub.

01

BOLT-ON FITMENT

Mounts using the vehicle's factory mounting points.

02

NO DRILLING

Bolts to factory tray mounting points, no drilling into the tub.

03

HARDWARE SUPPLIED

All hardware needed for installation is included in the box.

04

CHECK THE FIT

Offer the part up before final fitting to confirm alignment.

FITTING IS STRAIGHTFORWARD.
AUCKLAND BASED Our own warehouse, real stock on the shelf
SHIPPED NZ-WIDE Overnight most NI urban, 2 to 3 days SI, rural longer
300+ 5-STAR REVIEWS Verified reviews from Kiwi 4x4 owners
IN-HOUSE INSTALLATION Our own team can fit it for you
BEFORE YOU BUY

COMMON QUESTIONS

Will this fit my Ford Ranger?

This is made for the Ford Ranger specifically, not a universal part trimmed to suit. It is listed to fit PX1 2012–15 · PX2 2016–18 · PX3 2019–21 · PX4 2022–26.

Model runs change part way through a year, so if your vehicle sits near the edge of that range, send us your rego or VIN and we will confirm the fitment before you order rather than after.

Will it work with a tonneau, hard lid or canopy?

It mounts into the tray, so it comes down to where your lid or cover sits and how far forward it opens. Some combinations work as-is and some need the cover adjusted.

Tell us exactly what you have on the back now and we will tell you before you order, rather than you finding out in the driveway.

How does it mount, and can I hang gear off it?

It bolts into the tray using the supplied hardware, and the mounting points for lights and tie-downs are already built into the bar rather than something you drill later.

It is a two-person lift. Anything you mount high changes how the load sits, so keep heavy gear low and check your tie-downs after the first run.

If you would rather not do it yourself, our own team fits these in-house at our Avondale workshop. Call 021 541 306 to book a time.

How fast will it get to me?

Orders placed on a business day are usually picked and dispatched the same or the next business day from our own Auckland warehouse, and you get tracking by email as soon as it leaves us.

From the day it ships, North Island urban addresses are generally overnight and South Island urban is 2 to 3 business days. Rural addresses take a little longer. You can also choose pickup at checkout and collect from our Avondale store once we email to say it is ready.

What happens if it does not fit, or I change my mind?

You can return any unused, uninstalled item in its original packaging within 30 days of delivery for a refund or an exchange, and there is no restocking fee. Ordering the wrong part, or finding it does not suit your vehicle, is covered.

Email info@toughtrucks.nz or call 021 541 306 before you send anything back so we can confirm the return and give you the correct address. Once it is back with us and checked, refunds go through within 5 business days.

Still not sure it is the right part? Call 021 541 306 or email info@toughtrucks.nz with your rego and we will confirm fitment before you order.

READY TO FIT YOUR UTE?

BUILT FOR YOUR UTE.

HEAVY-GAUGE STEEL construction, vehicle-specific fitment and straightforward installation.

FITMENT PX1 2012–15 · PX2 2016–18 · PX3 2019–21 · PX4 2022–26
MATERIAL HEAVY-GAUGE STEEL
INSTALLATION BOLT-ON, NO DRILLING
FORD RANGER RANGER-EXTENDED
$799.00
✓ Vehicle-specific fitment✓ All mounting hardware included